Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

基体和增强体对聚合物基摩擦材料性能影响研究

摩擦系数、磨损率和冲击强度是聚合物基摩擦材料的重要性能指标。本文试验研究基体含量对摩擦系数、磨损率的影响和增强体含量对冲击强度的影响,从理论方面分析增强体对摩擦磨损性能的影响。试验结果表明,在进行聚合物基摩擦材料的配方设计时,要根据所选用酚醛树脂和增强纤维的种类合理控制用量,可达到较好的摩擦磨损性能和冲击韧性。     

Desalination in the gaza strip: drinking water supply and environmental impact

More than 90% of the population of the Gaza Strip depends on desalinated water for drinking purposes. About 90% of the groundwater is unacceptable for drinking as a result of contamination by nitrate and chloride. One of the major options for resolving the water problems is the utilization of desalination technology for both sea and brackish water. The objective of this article is to address desalination water management in its embryonic stage in the Gaza Strip. The sources of drinking water supply, distribution system and the environmental impact of brine water will be fingered in detail. Desalination facilities range from large seawater plants to small brackish desalination units on a home scale. Governmental, non-governmental and private desalination plants are common. The distribution system of desalinated water is a responsibility of governmental, non-governmental, private small community bodies and even individuals. Disposal of brine water is made either directly or indirectly into the sea, sewage system, poor land, channels, wadies, etc. Brine constituents have an adverse impacton the surrounding environment, e.g., sea life, soil, wastewater treatment plants and the groundwateraquifer. The lack of real environmental impact assessments, especially for mid- and home-scale units may lead to a deterioration of the environment. The fragmentation of the responsibilities of water desalination, distribution of desalinated water and the disposal of brine water suggest that urgent action should be taken (e.g., legislation or establishment of a supervisory body). In other words, strict policies and management actions are to be taken in order to alleviate the health and environmental impact of an important and uncontrolled new system.     

抗冲聚丙烯结构与性能研究

对部分国内外抗冲聚丙烯(PP)产品进行了微观形态和结构分析，研究其对材料宏观力学性能的影响。实验结果表明：抗冲PP是一个含有PP均聚物、丙烯与乙烯-丙烯两嵌段共聚物、乙丙橡胶(EPR)、聚乙烯均聚物等的多相体系。EPR的分子序列结构对聚合物抗冲击性能起主要作用。在序列结构中，丙烯、乙烯单体在分子链上的位置交换越频繁，抗冲击性能越得到提高。丙烯序列平均长度的增大对抗冲击性能有一定的削弱作用。     

我国PVC抗冲改性剂的发展现状

综述了我国PVC抗冲改性剂的发展状况,主要介绍了ACR、CPE、MBS、ABS、EVA及EPR的生产、市场需求及研究进展。目前我国ACR的生产能力为12.5万t·a-1、CPE35万t·a-1、MBS1.9万t·a-1、ABS128万t·a-1、EVA4万t·a-1、EPR2.5万t·a-1。2005年ACR需求量4万t、CPE8万t;2010年ACR需求量将为7.5万t、CPE11万t。指出了ACR是性能最优的PVC抗冲改性剂。     

丁苯透明抗冲树脂的合成和性能

以苯乙烯、丁二烯为单体，Ｓ－ＢｕＬｉ为引发剂，环己烷为溶剂，烷氧基硅烷为偶联剂，通过负离子聚合和偶合反应，再经化学处理而制得了具有星形嵌段结构的两个牌号丁苯透明抗冲树脂ＬｙＢＤＳ－０１，ＬｙＢＤＳ－０３。试验考察了聚合温度对反应速率的影响，单体配比，共聚物结构与树脂性能的关系，测试结果表明，ＬｙＢＤＳ－０３的伸长率约为ＬｙＢＤＳ－０１的１０倍，冲击强度约大１倍，硬度小于ＬｙＢＤＳ－０１。两个牌号树     

铝系阻燃剂阻燃PP的力学性能研究

将用偶联剂处理的碱式碳酸铝镁加入到聚丙烯中，通过对体系阻燃性、力学性能等研究得出：碱式碳酸铝镁能够对聚丙烯起到良好的阻燃效果，碱式碳酸铝镁的加入提高了聚丙烯的冲击强度，当碱式碳酸铝镁质量分数为23％时，体系的冲击强度最高。研究了偶联荆的用量对体系力学性能的影响，结果表明，随偶联荆用量的增加，体系的拉伸强度降低，冲击强度先升高后降低，当偶联荆质量分数为1．0％时，体系的冲击强度最高。     

复合材料弹道冲击性能研究进展

本文总结了近年来复合材料弹道冲击研究的进展,着重从纤维集合体的结构对弹道冲击损伤机理的影响、弹道冲击的分析模型及数值模拟做了概述,总结了人们为提高复合材料弹道冲击性能所做的努力,最后指出了几个尚需深入解决的问题.     

Influence of chitosan characteristics on coagulation and flocculation of organic suspensions

Several samples of chitosan with different degrees of deacetylation and of different molecular weights were tested for the coagulation–flocculation of organic suspensions. Organic suspensions were prepared by mixing mushroom powder with tap water. Experiments were carried out at pH 5, pH 7, and pH 9. Because decreasing the pH reduced the amount of chitosan required to reach the required turbidity, at pH 9, a high concentration of chitosan was required to achieve the required treatment levels, whereas the difference was less significant between pH 7 and pH 5 (the required concentration of chitosan was halved). Though viscosity, correlated to the molecular weight of chitosan, affected treatment performance, its influence on the efficiency of coagulation–flocculation could be substantially reduced by slightly increasing the concentration of the polymer. This is of importance in the processing of industrial effluents: the aging of a chitosan solution, which may cause partial depolymerization, and loss of viscosity, will have a limited impact on process efficiency. The degree of deacetylation also has a limited effect on treatment performance, especially when the degree of deacetylation exceeds 90%. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2070–2079, 2005     

PHEVs对配电网故障影响研究

电力工作者对插入式混合动力汽车（PHEVs）进行了大量的研究与讨论,但关于PHEVs对配电网故障的影响却鲜见报道.简要介绍目前PHEVs的研究现状和PHEVs车载电池特性;并以配电网馈线故障电流有效值作为研究对象,研究PHEVs充电对配电网故障的影响,Matlab仿真结果表明：PHEVs的接入不仅影响馈线电流有效值,同时还影响故障电流增长率.